What is Canesten Hydrocortisone Cream?

Canesten Hydrocortisone is used to treat athlete’s foot and fungal sweat rash when there are additional symptoms of inflammation (such as swelling, redness and itching).

Canesten Hydrocortisone treats the fungal skin infection and reduces the swelling and itching caused by it.

The active substances in Canesten Hydrocortisone are clotrimazole and hydrocortisone acetate. Clotrimazole belongs to a group of medicines called imidazoles, which destroy the fungi and some bacteria that cause skin infections. Hydrocortisone acetate is a mild steroid which reduces swelling, redness and itching associated with inflammation of the skin.

What are fungal infections?

Fungal infections are very common and affect many people. Two of the most common fungal skin infections include athlete’s foot and sweat rash.

There are two main types of fungal infection:

• The tinea group, also known as dermatophytes.
• The candida group, also known as yeasts.

The tinea group includes athlete’s foot which is easily spread by contact. The fungus that causes athlete’s foot usually lives harmlessly on our skin and in our environment. The natural balance that normally keeps it under control can be upset by factors such as damp, moist conditions. This could happen, for example, through regularly wearing training shoes that keep the feet hot and sweaty. Since this fungus is contagious, it can also often be picked up in changing rooms. The main symptom is an itchy, scaly and irritating rash.

The candida group can be responsible for conditions such as sweat rash. Sweat rash can appear anywhere on the body but is more likely to occur where folds of skin rub against each other, such as: under the breasts, under arms, around the groin and on the back. Candida is a yeast-like fungus that usually lives harmlessly on our skin. However, the natural balance that normally keeps it under control can be upset by factors such as sweating, tight or synthetic clothing and cosmetic preparations such as bath additives. When levels of the yeast increase, the skin can develop the following symptoms: persistent burning and itching, soreness and a variety of patches or blemishes as well as a softened and soggy appearance.

How to use Canesten Hydrocortisone Cream

• Before use, pierce the tube seal by inverting the cap over the end of the tube and press.
• If the feet are infected, they should be washed and dried thoroughly, especially between the toes, before applying the cream.
• Canesten Hydrocortisone should be applied thinly and evenly to the affected areas twice daily and rubbed in gently. Approximately 1cm of cream per application should be enough.
• Do not cover the area being treated with a dressing or bandage.
• As with all products containing hydrocortisone, you should wash your hands immediately after applying the cream.

The symptoms of a skin infection, such as itching or soreness should improve within a few days of treatment although signs such as redness and scaling may take longer to disappear. If the symptoms persist or do not start to improve after seven days, consult your doctor.

You can help the treatment to work if you follow these simple self-help tips:

• Although the infected area will itch, try not to scratch. Scratching will damage the surface of the skin and cause the infection to spread further.
• Keep the affected skin areas clean.
• Pay particular attention to drying the skin, but avoid excessive rubbing.
• Do not share towels, bath mats, etc. with other people as you could spread the infection to them.
• Always wash your hands after treating the infection to prevent it from spreading.

If you have athlete’s foot:

• Remember to dry the skin between the toes thoroughly.
• Wash your socks, stockings and tights thoroughly in hot water to remove any shed skin or fungal spores.
• Change your footwear daily if possible.

What does Canesten Hydrocortisone Cream contain?

The active substances are clotrimazole and hydrocortisone acetate. Each gram of cream contains 10mg clotrimazole and 11.2mg hydrocortisone acetate (equivalent to 10mg hydrocortisone).

What is Eumovate Eczema and Dermatitis Cream 0.05%?

Eumovate is used for the short-term treatment and control of patches of red, itchy skin caused by eczema and dermatitis. The cream stops the skin’s over-reaction to the triggers that cause skin flare-ups, such as eczema or dermatitis. The active ingredient is clobetasone butyrate, a topical corticosteroid to control skin inflammation. The cream base also has moisturising properties.

When can I use Eumovate Cream?

Eumovate cream contains a steroid that reduces inflammation and flare-ups of psoriasis or eczema, often associated with swelling, itching, redness and irritation.

What is eczema, dermatitis and psoriasis?

Eczema is a dry skin condition which makes skin feel itchy, dry and irritated. Dermatitis is a sort of inflammation triggered when the skin comes in contact with something irritable, like harsh additives or disinfectants. Psoriasis is characterised by flaky, red skin patches covered in silver scales, which may be sore and itchy. Flare-ups of eczema and psoriasis may involve:

• Dry skin
• Redness
• Itching
• Blisters
• Cracked skin
• Inflammation

Managing eczema and dermatitis

Skin specialist advice - Skin specialists often advise people with eczema or dermatitis to use emollient (moisturising) skin products, including creams and bath oils, to keep moisture in the skin. This can make your skin more resistant to flare-ups. Avoid using soap and heavily scented products.

If a rash comes back - Sometimes people with dermatitis find their rash soon comes back after treatment or never disappears completely. This is often because they are still in contact with their trigger, i.e. what causes the reaction.

Common triggers of eczema and dermatitis include:

• Jewellery, including earrings or studs (especially gold-plated earrings)
• Coins
• Watch buckles, metal straps or the metal back of a watch
• Metal studs or fastenings on jeans, bras or underwear.

All of these have a metal in them called nickel, which is a very common trigger. If you react badly to nickel, all of the triggers in the list could be a problem. So, if you’ve reacted badly to one of the common triggers, you’ll need to watch out for the other common triggers. 

 Other common triggers of eczema and dermatitis include:

• In the home: such as plasters, furniture polish, varnishes, rubber gloves or elastic in clothes
• In substances you use at work, such as glues, oils, lubricants or cement
• In the garden: certain plants and weeds, gardening gloves.

How to use Eumovate Cream

• Adults and children 12 years and over: Use the cream once or twice daily for up to 7 days.
• Wash and dry your hands.
• Squeeze out the correct amount of cream onto your index finger.
• Half a fingertip will cover a patch of skin the same size as the palm of your hand.
• Gently rub cream into the skin you are treating once or twice a day.
• Wash your hands again (unless it is your hands you are treating).

How much Eumovate Cream to use

• Squeeze out the cream along the top of your index finger
• Squeeze the cream halfway to your fingertip from the crease in your finger. This will cover a patch of skin the same size as the palm of your hand.
• Use the fingertip unit as a guide. For smaller areas, use a smaller amount. This cream is not meant to treat large areas.
• If you use too much of the cream by mistake, don’t worry – but try to keep to the fingertip unit.
• Half a fingertip will cover a patch of skin the same size as the palm of your hand.

Important information about Eumovate

Eumovate contains a moderate steroid and should only be used for short-term use (maximum one week). Thin layers of Eumovate must be applied, as steroids thin the skin. Eumovate cannot be applied to infected, oozing skin or open wounds. If the condition does not improve or worsens after using Eumovate, then treatment should be discontinued, and you should consult your doctor. Eumovate must not be applied to the genital or facial regions.

What are Paracetamol Tablets?

Paracetamol is a pain reliever (analgesic) which helps reduce your temperature when you have a fever.

These tablets are for the relief of mild to moderate pain including headache, migraine, toothache, nerve pain, sore throat and period pains. They are also for the symptomatic relief of sprains and strains, rheumatic pains, sciatica, lumbago, fibrositis, muscular aches and pains, joint swelling and stiffness, flu, feverishness and feverish colds.

How to take Paracetamol Tablets

Swallow the capsules whole with water. Do not chew.

Adults, the elderly and children over 16 years:

• 2 capsules to be taken every 4 to 6 hours as required. Do not take more than 4 doses (8 capsules) in any 24 hour period.

Children aged 12 to 15 years:

• 1 capsule to be taken every 4 to 6 hours, as required. Do not take more than 4 doses (4 capsules) in any 24 hour period.

What do Paracetamol Tablets contain

Each tablet contains the active ingredient: paracetamol 500 mg.

What are Cyanocobalamin 50mcg Tablets?

Cyanocobalamin Tablets contain cyanocobalamin, which is known as vitamin B12.

Most people get enough vitamin B12 from their food, but if you have had stomach surgery, or certain diseases of the intestines, or a restricted diet, you may not absorb enough vitamin B12.

Lack of vitamin B12 in the body causes a disease called pernicious anaemia (reduction in the number of red blood cells) which is often treated with vitamin B12 injections.

Cyanocobalamin tablets are used to treat vitamin B12 deficiency when injections cannot be used.

How to take Cyanocobalamin 50mcg Tablets

The recommended dose is:

Adults and Elderly: one to three tablets daily.

Children: one tablet daily.

Cyanocobalamin Tablets should be swallowed with water and taken between meals. Do not stop taking this medicine, except on your doctor’s advice. Your doctor may change the dose, depending on how you react to it.

If you accidentally take too much of this medicine, bring any remaining tablets and this leaflet with you to your doctor or pharmacist so that they know exactly what you have taken.

What do Cyanocobalamin 50mcg Tablets contain?

The active substance is cyanocobalamin. Each film-coated tablet contains 50 micrograms cyanocobalamin.

Cyanocobalamin Tablets also contains lactose, maize starch, magnesium stearate and purified water. The film coating includes hydroxypropyl methylcellulose, ethylcellulose, acetylated monoglyceride, speed colour white 27120 anstead HSE, isopropyl alcohol and dichloromethane.

What is Floradix Liquid Iron?

Floradix Liquid is a daily supplement that helps decrease tiredness and fatigue. Floradix Liquid can be taken by anyone over the age of three, making it the perfect iron supplement for the entire family. Floradix Liquid is free from dairy and lactose and is vegetarian friendly. It is suitable for pregnant and breastfeeding women and those women who are planning a pregnancy.

How will this supplement help to reduce my tiredness?

Floradix Liquid contains vitamin B, vitamin C and iron, which all help to promote the production of red blood cells and haemoglobin, which will then reduce fatigue.

Unique features of Floradix Liquid Iron

• Non-constipating formula
  
• Herbal extracts help maintain healthy digestion
• Developed with a pleasant taste
• Free from chemical preservatives, colourings, or flavourings
• Free from alcohol, animal derivatives, nuts, lactose, and dairy produce

How does Floradix Liquid Iron help with my fatigue?

Floradix Liquid contains iron which helps promote the production of red blood cell and haemoglobin, which will then reduce fatigue.

How to take Floradix Liquid Iron?

For maximum absorption, Floradix tablets should be taken on an empty stomach, at least half an hour before food or two hours after.

For children 3- 5 years: 5ml daily

For children 6- 12 years: 10ml daily

For adults and children over 12 years: 10ml, twice daily

What is Calpol Calgel Teething Gel?

Calpol Calgel teething gel Can be used to help relieve pain and discomfort associated with teething for Infants over the age of 5 months. It quickly relieves the pain and soothes your baby’s sore gums with a mild anesthetic. It also has a mild antiseptic to help fight infection. This product can be taken alongside Calpol Suspension if pain and fever relief is also needed. 

Baby Teething Symptoms may include the following:

• Baby teeth sometimes emerge with no pain or discomfort at all.

At other times, you may notice:

• Their gum is sore and red where the tooth is coming through
• They have a mild temperature of less than 38C
• They have 1 flushed cheek
• They have a rash on their face
• They're rubbing their ear
• They're dribbling more than usual
• They're gnawing and chewing on things a lot
• They're more fretful than usual
• They're not sleeping very well

How to use Calpol Calgel Teething Gel

• Apply a pea-sized amount with a clean finger to the affected area of gum.
• The dose may be repeated if necessary, after 3 hours, up to a maximum of 6 doses in 24 hours.
• Treatment should be stopped once symptoms have resolved.
• Do not use more than one product containing lidocaine at the same time.

What does Calpol Calgel Teething Gel contain?

The active ingredients are Lidocaine Hydrochloride Monohydrate 0.33% w/w Cetylpyridinium Chloride 0.10% w/w

What is Gaviscon Advance Aniseed Flavoured Suspension

Gaviscon Advance belongs to a group of medicines called "reflux suppressants".

This product forms a protective layer that floats on top of the stomach contents. This layer prevents reflux and keeps the stomach contents away from the lining of the food pipe to relieve heartburn symptoms and acid indigestion.

Gaviscon can also be used to relieve the symptoms of conditions such as hiatus hernia (protrusion of muscle through a muscle wall), reflux oesophagitis (inflamed food pipe) and chloroquine (a medication used to prevent malaria), bisphosphonates (a medication used to treat osteoporosis) and estramustine (a medication to treat prostate cancer).

How to take Gaviscon Advance Aniseed Flavoured Suspension

Check that the cap seal is unbroken before first using this product. Shake well before use.

Adults, including the elderly and children 12 years and over: 5-10 ml (one to two 5ml spoonfuls) after meals and at bedtime.

Children under 12 years: Should only be taken on medical advice.

If you forget a dose, it is not necessary to double the dose next time; carry on taking it as before.

If you take too much of this product, you may feel bloated and experience some abdominal discomfort. It is unlikely to cause you any harm, but please consult your doctor or pharmacist if this doesn’t go away.

What does Gaviscon Advance Aniseed Flavoured Suspension contain

Every 10 ml of oral suspension contains 1000 mg sodium alginate and 200 mg potassium hydrogen carbonate as the active ingredients.

The other ingredients are calcium carbonate, carbomer, methyl (E218) and propyl (E216) parahydroxybenzoates, sodium saccharin, sodium hydroxide, aniseed flavour derived from fennel and purified water. This product does not contain sugar or gluten.

What is Dermol 500 Lotion

Dermol 500 Lotion is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap-substitute

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol 500 Lotion, including babies.

There are two types of the active ingredient in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials. These help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol 500 Lotion

Use it only on the skin. For maximum benefit, you should use this product on a regular basis and as often as required.

Before using the 500 ml bottle, turn the top of the pump dispenser anti-clockwise to unlock it.

After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application

• Apply Dermol 500 Lotion to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol 500 Lotion, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol 500 Lotion to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

What does Dermol 500 Lotion contain?

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (2.5% w/w) and isopropyl myristate (2.5% w/w).

The other ingredients are cetostearyl alcohol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol and purified water.

What are Cuprofen Maximum Strength Tablets?

Cuprofen Maximum Strength Tablets contain 400mg of the active ingredient ibuprofen. Ibuprofen belongs to the class of medicines called non-steroidal anti-inflammatory agents which reduce pain, fever and inflammation.

Cuprofen Maximum Strength tablets are used for the relief of rheumatic, muscular, dental and period pains and pain in backache, neuralgia, migraine and headache, and for the symptomatic relief of colds, flu and feverishness.

How to take Cuprofen Maximum Strength Tablets

For oral use. This product is intended for short term use only. You should take the lowest dose for the shortest time necessary to relieve your symptoms. You must contact a doctor if your symptoms worsen or do not improve after three days for children and adolescents between 12 and 18 years and after ten days for adults.

For adults and children & adolescents between 12 and 18 years:

• Take one tablet with water up to three times a day as required.

• To be taken preferably with food.

• Leave at least 4 hours between doses.

• Do not take more than three tablets in any 24 hours.

• Do not exceed the stated dose.

Children under 12 years:

• Not suitable for children under 12 years.

If you have taken more medicine than you should, or if children have taken this medicine by accident, always contact a doctor or the nearest hospital to get an opinion of the risk and advice on action to be taken.

The symptoms can include nausea, stomach pain, vomiting (may be blood-streaked), headache, ringing in the ears, confusion and shaky eye movement. At high doses, drowsiness, chest pain, palpitations, loss of consciousness, convulsions (mainly in children), weakness and dizziness, blood in urine, cold body feeling, and breathing problems have been reported.

What is Dermol Cream

Dermol Cream is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap substitute.

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol Cream, including babies.

There are two types of active ingredients in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials that help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol Cream

Use it only on the skin. For maximum benefit, you should use it on a regular basis and as often as required.

Before using the cream, turn the top of the pump dispenser anti-clockwise to unlock it. After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application:

• Apply Dermol Cream to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol Cream, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol Cream to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

If you forget to use Dermol Cream

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you require it.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water. If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol Cream contain

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (10% w/w) and isopropyl myristate (10% w/w).

The other ingredients are cetostearyl alcohol, glycerol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol, disodium phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate and purified water.

What is Cetraben Cream?

Cetraben is a range of emollient products designed to help you manage dry, problematic and eczema-prone skin.

It's unique and balanced formulation helps to treat dry and eczema-prone skin by rehydrating and protecting it from irritants.

• Cetraben helps to relieve discomfort, reduces the itch and need to scratch it.
• Smoothes, moisturises and protects the skin.
• It's fragrance free.
• Cetraben is not tested on animals and does not contain any ingredients derived from animals.
• The first medicated skincare brand to have its research approved by the British Skin Foundation.

How to use Cetraben Cream

• Apply to the skin as often as required or directed by your pharmacist or GP, to ensure continued hydration throughout the day. We recommend that you treat your skin as frequently as possible, or as a minimum at least twice a day.
• Apply liberally to the affected skin, as often as you feel the need to, ensuring that the area is well covered.
• Apply gently in the direction of hair growth until absorbed.
• Avoid rubbing the cream vigorously as this could trigger itching, creating more heat in the skin.
• Apply your emollient before and after you bathe to protect your skin from dryness.

What is HC45 Hydrocortisone Cream?

HC45 Hydrocortisone Cream is a steroid cream used for inflammations of mild to moderate eczema, dermatitis and reactions to insect bites, nickel and plants. HC45 cream is used to reduce irritation, itching and redness. This cream can only be used for adults and children over the age of 10.

What is eczema and dermatitis?

Eczema is a dry skin condition which makes skin feel itchy, dry and irritated. Dermatitis is an inflammation triggered when the skin comes into contact with something irritable, like harsh additives and disinfectants.

How does HC45 Cream work to treat skin inflammation and redness?

HC45 cream includes 1% w/w hydrocortisone, which decreases the release of inflammatory substances within the bloodstream, thereby reducing swelling, itching and redness.

How to use HC45 Cream

Use sparingly on small skin areas, once or twice a day, for a maximum of 7 days.

If the condition does not improve, consult your doctor.

Important Information about HC45 Cream

HC45 cream contains a steroid cream and should only be used for short-term use (maximum one week). Thin layers of HC45 cream must be applied only to the affected area, as steroids thin the skin. HC45 cream cannot be applied to infected, oozing skin or open wounds. If the condition does not improve or worsens after using HC45 cream, treatment should be discontinued, and you should consult your doctor. HC45 cream must not be applied to the genital or facial regions.

What is Epimax Original Cream

Daily use in eczema, psoriasis and other dry skin conditions

Your everyday emollient to keep your skin hydrated and comfortable. Apply on the go as a moisturiser to gently relieve your dry skin symptoms and lock in moisture. You can also use it as a body wash in the shower.

Ideal for daily use in eczema, psoriasis and other dry skin conditions.

• SLS-free
• Lanolin-free
• Paraben-free
• Gluten-free
• Perfume-free
• Vegan
• Soap substitute
• Widely recyclable

How to use Epimax Original Cream

Apply to skin as frequently as required, smoothing gently into the affected areas in the direction of hair growth. 

To use as a skin cleanser or a soap substitute, use as required instead of soap when washing in the bath or shower.

What does Epimax Original Cream contain

White soft paraffin 15% w/w, cetostearyl alcohol, liquid paraffin 6% w/w, polysorbate 60, phenoxyethanol and water

What is Dermol 500 Lotion

Dermol 500 Lotion is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap-substitute

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol 500 Lotion, including babies.

There are two types of the active ingredient in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials. These help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol 500 Lotion

Use it only on the skin. For maximum benefit, you should use this product on a regular basis and as often as required.

Before using the 500 ml bottle, turn the top of the pump dispenser anti-clockwise to unlock it.

After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application

• Apply Dermol 500 Lotion to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol 500 Lotion, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol 500 Lotion to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

What does Dermol 500 Lotion contain?

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (2.5% w/w) and isopropyl myristate (2.5% w/w).

The other ingredients are cetostearyl alcohol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol and purified water.

What is Dermol Cream

Dermol Cream is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap substitute.

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol Cream, including babies.

There are two types of active ingredients in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials that help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol Cream

Use it only on the skin. For maximum benefit, you should use it on a regular basis and as often as required.

Before using the cream, turn the top of the pump dispenser anti-clockwise to unlock it. After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application:

• Apply Dermol Cream to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol Cream, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol Cream to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

If you forget to use Dermol Cream

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you require it.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water. If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol Cream contain

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (10% w/w) and isopropyl myristate (10% w/w).

The other ingredients are cetostearyl alcohol, glycerol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol, disodium phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate and purified water.

What is Acnecide Gel?

• Acnecide contains benzoyl peroxide, which attacks the bacteria (germs) known as Propionibacterium acnes, one of the leading causes of acne.
• Your doctor or pharmacist has recommended this medicine to treat your acne. Acne appears as blackheads and whiteheads, which people often refer to as pimples or spots.
• Acne of the face, chest or back may be treated with this medicine.

How to apply Acnecide Gel

Always use this medicine as described in this leaflet or as your doctor or pharmacist has told you. Check with your doctor or pharmacist if you are not sure.

• Acnecide is for EXTERNAL USE ONLY.
• Unless your doctor or pharmacist has told you otherwise,
• Wash the affected area with a mild skin cleanser and water, and gently pat your skin dry.
• Apply the gel in a thin layer once or twice a day to all the affected areas.
• If you have sensitive skin, apply the gel once daily before going to bed
• Any drying or peeling to your skin may be reduced if you alter the number of times you apply, i.e., once a day or once every two days, until your skin adjusts to the product.
• You should try to avoid exposure to strong sunlight while using Acnecide. If exposure is unavoidable, use a suitable sunscreen lotion and apply Acnecide in the evening. Remember to wash the affected area before use.
• How long you will have to use Acnecide will depend on how quickly your condition improves. After you have used it for one month, you should see your doctor or pharmacist again. They can then check the improvement of your condition.
• This medication should be discontinued if it causes Swelling and blistering of the skin, sensitivity to sunlight, and sunlamps.
• This product should not be applied to damaged or sensitive skin. 

What is in this medicine

The active substance is hydrous benzoyl peroxide equivalent to benzoyl peroxide 5% w/w in an aqueous, non-alcoholic gel base.

What is AproDerm Colloidal Oat Cream

Our AproDerm Colloidal Oat Cream has been specially formulated with active colloidal oatmeal and apricot oils to help soothe, moisturise and protect your dry skin and skin suffering from Eczema or Psoriasis. Suitable for daily use, this paraffin-free cream is the perfect moisturiser and soap substitute to add to your skincare routine if you’re looking for something which will leave your skin looking healthy and hydrated but not greasy before you head out to start your day. SLS, parabens and fragrances can irritate and aggravate sensitive skin, so we’ve made sure to keep them out of all our products meaning they are safe and gentle enough to use on everyone in your family from birth upwards.

How to use AproDerm Colloidal Oat Cream

• Wash hands before applying.
• Break the tamper-evident seal on the pump and turn the nozzle clockwise to open.
• Press the pump ten times on your first use to release cream onto your hand.
• Apply AproDerm Colloidal Oat Cream regularly, liberally and frequently using gentle strokes and following the direction of hair growth to keep your skin soft and moisturised
• Do not rub, as this can cause irritation and itching and may block hair follicles, causing inflammation (folliculitis).
• For maximum effectiveness, leave a thin layer of cream on the skin to soak in.
• How often you apply, AproDerm Colloidal Oat Cream will depend on how dry your skin is.
• AproDerm Colloidal Oat Cream can be used instead of soap (soap substitute). Apply to your skin whilst showering to clean and moisturise simultaneously.
• Re-apply after showering to skin that is almost dry to lock in moisture.
• If you have eczema or psoriasis, continue using AproDerm Colloidal Oat Cream even after the skin has improved to reduce the risk of flare-ups.
• Safe to use during pregnancy or breastfeeding as AproDerm Colloidal Oat Cream is unlikely to have any ill effects when used as directed; however, if you are unsure, feel free to talk to your doctor or pharmacist.
• If you are accidentally swallowed, immediately see a doctor for external use, taking the pack with you.

What does AproDerm Colloidal Oat Cream contain

Active Ingredient: Avena Sativa Kernel Flour 1%

Other Ingredients: Purified Water, Apricot Kernel Oil, Glycerin, Sucrose Stearate, Cetearyl Alcohol, Glyceryl Stearate SE, Dimethicone, Phenoxyethanol, Vitamin F Ethyl Ester, Ethylhexylglycerin, Xanthan Gum, Disodium EDTA, Vitamin E.

What is Cetraben Cream?

Cetraben is a range of emollient products designed to help you manage dry, problematic and eczema-prone skin.

It's unique and balanced formulation helps to treat dry and eczema-prone skin by rehydrating and protecting it from irritants.

• Cetraben helps to relieve discomfort, reduces the itch and need to scratch it.
• Smoothes, moisturises and protects the skin.
• It's fragrance free.
• Cetraben is not tested on animals and does not contain any ingredients derived from animals.
• The first medicated skincare brand to have its research approved by the British Skin Foundation.

How to use Cetraben Cream

• Apply to the skin as often as required or directed by your pharmacist or GP, to ensure continued hydration throughout the day. We recommend that you treat your skin as frequently as possible, or as a minimum at least twice a day.
• Apply liberally to the affected skin, as often as you feel the need to, ensuring that the area is well covered.
• Apply gently in the direction of hair growth until absorbed.
• Avoid rubbing the cream vigorously as this could trigger itching, creating more heat in the skin.
• Apply your emollient before and after you bathe to protect your skin from dryness.

What is Cetraben Cream?

Cetraben is a range of emollient products designed to help you manage dry, problematic and eczema-prone skin.

It's unique and balanced formulation helps to treat dry and eczema-prone skin by rehydrating and protecting it from irritants.

• Cetraben helps to relieve discomfort, reduces the itch and need to scratch it.
• Smoothes, moisturises and protects the skin.
• It's fragrance free.
• Cetraben is not tested on animals and does not contain any ingredients derived from animals.
• The first medicated skincare brand to have its research approved by the British Skin Foundation.

How to use Cetraben Cream

• Apply to the skin as often as required or directed by your pharmacist or GP, to ensure continued hydration throughout the day. We recommend that you treat your skin as frequently as possible, or as a minimum at least twice a day.
• Apply liberally to the affected skin, as often as you feel the need to, ensuring that the area is well covered.
• Apply gently in the direction of hair growth until absorbed.
• Avoid rubbing the cream vigorously as this could trigger itching, creating more heat in the skin.
• Apply your emollient before and after you bathe to protect your skin from dryness.

What Is Epimax Isomol Gel

Epimax Isomol Gel is ideal for daily use with eczema, psoriasis and other dry skin conditions.

Our hydro-gel formula means you’ll get all the comfort of a cream, balanced with the more intensive relief that an ointment gives. Smooth into the skin for a cooling effect that helps to relieve the itch.

Ideal for daily use in eczema, psoriasis and other dry skin conditions.

• SLS-free
• Lanolin-free
• Paraben-free
• Gluten-free
• Perfume-free
• Vegan
• Soap substitute
• Widely recyclable

How To Use Epimax Isomol Gel

Apply to skin as frequently as required, smoothing gently into the affected areas in the direction of hair growth. 

To use as a skin cleanser or a soap substitute, use as required instead of soap when washing in the bath or shower.

What Does Epimax Isomol Gel Contain

Isopropyl myristate 15% w/w, liquid paraffin 15% w/w, glycerol, carbomer, polysorbate 20, triethanolamine, phenoxyethanol, ethylhexylglycerin and water

What is Epimax Ointment

Epimax Ointment is designed for daily use with eczema, psoriasis and other dry skin conditions.

If you’re experiencing dehydrated skin that needs extra hydration, apply our ointment for long-lasting, intensive relief whenever you need it. For use during the day or at night-time as an overnight treatment, it can be added to your bath as a skin cleanser. 

Lasting protection for intensive relief, day and night.

Ideal for daily use in eczema, psoriasis and other dry skin conditions.

How to use Epimax Ointment

Apply to skin as frequently as required, smoothing gently into the affected areas in the direction of hair growth. 

To use as a skin cleanser or a soap substitute, use as required instead of soap when washing in the bath or shower.

As a bath additive, melt about 4g (the size of a £2 coin) in hot water and add to the bath. Care should be taken as this can make the tub slippery.

What does Epimax Ointment contain

Liquid paraffin 40% w/w, cetomacrogol emulsifying wax (contains cetostearyl alcohol and macrogol cetostearyl ether), yellow soft paraffin 30% w/w.

What is Acnecide Gel?

• Acnecide contains benzoyl peroxide, which attacks the bacteria (germs) known as Propionibacterium acnes, one of the leading causes of acne.
• Your doctor or pharmacist has recommended this medicine to treat your acne. Acne appears as blackheads and whiteheads, which people often refer to as pimples or spots.
• Acne of the face, chest or back may be treated with this medicine.

How to apply Acnecide Gel

Always use this medicine as described in this leaflet or as your doctor or pharmacist has told you. Check with your doctor or pharmacist if you are not sure.

• Acnecide is for EXTERNAL USE ONLY.
• Unless your doctor or pharmacist has told you otherwise,
• Wash the affected area with a mild skin cleanser and water, and gently pat your skin dry.
• Apply the gel in a thin layer once or twice a day to all the affected areas.
• If you have sensitive skin, apply the gel once daily before going to bed
• Any drying or peeling to your skin may be reduced if you alter the number of times you apply, i.e., once a day or once every two days, until your skin adjusts to the product.
• You should try to avoid exposure to strong sunlight while using Acnecide. If exposure is unavoidable, use a suitable sunscreen lotion and apply Acnecide in the evening. Remember to wash the affected area before use.
• How long you will have to use Acnecide will depend on how quickly your condition improves. After you have used it for one month, you should see your doctor or pharmacist again. He or she can then check the improvement of your condition.
• This medication should be discontinued if it causes Swelling and blistering of the skin, sensitivity to sunlight, and sunlamps.
• This product should not be applied to damaged or sensitive skin. 

What is in this medicine

The active substance is hydrous benzoyl peroxide equivalent to benzoyl peroxide 5% w/w in an aqueous, non-alcoholic gel base.

What is Epimax Oatmeal Cream

 Epimax Oatmeal Cream is ideal for daily use with eczema, psoriasis and other dry skin conditions.

Smooth into dry and sensitive skin. The colloidal oatmeal will help with the symptoms triggered by environmental allergens and moisturise to protect against irritants. Use it as a moisturiser or a wash in the shower to leave the skin feeling soft and comfortable. 

Ideal for daily use in eczema, psoriasis and other dry skin conditions.

For light hydration and protection of sensitive skin

• SLS-free
• Lanolin-free
• Paraben-free
• Gluten-free
• Perfume-free
• Soap substitute
• Vegan
• Widely recyclable

How to use Epimax Oatmeal Cream

Apply to skin as frequently as required, smoothing gently into the affected areas in the direction of hair growth. 

To use as a skin cleanser or a soap substitute, use as required instead of soap when washing in the bath or shower.

What does Epimax Oatmeal Cream contain

Water, glycerol, distearyldimonium chloride, isopropyl palmitate, liquid paraffin 3.5% w/w, cetostearyl alcohol, dimethicone, avena sativa (oat) kernel flour, allantoin, white soft paraffin 0.75%, isopropanol, octyldodecanol, Phenoxyethanol, ethylhexylglycerin, sodium chloride, benzyl alcohol

What is Blistex Intensive Moisturiser Hydrating and Nourishing Lip Balm SPF10

Blistex Intensive Moisturiser is infused with a blend of rich moisturisers like Shea Butter to condition, Camphor to soothe and Allantoin to smooth. It moisturises deep down to intensely rehydrate your lips.

How to use Blistex Intensive Moisturiser Hydrating and Nourishing Lip Balm SPF10

Gently massage all over your lips every day. Re-apply as often as you like, especially if you’re out and about in dry, cold or sunny weather.

What does Blistex Intensive Moisturiser Hydrating and Nourishing Lip Balm SPF10 contain

Aqua, Hydrogenated Polyisobutene, Cera Alba, Petrolatum, Ethylhexyl Methoxycinnamate, Sorbitan Isostearate, Alcohol Denat., Hydrogenated Soy Polyglycerides, Glycerin, Polysorbate 60, Polyglyceryl-3 Diisostearate, Cetyl Alcohol, Stearyl Behenate, Mentha Piperita (Peppermint) Oil, Allantoin, Aroma, Camphor, Dimethicone, Olea Europaea (Olive) Fruit Oil, Ammonium Hydroxide, Arachidyl Alcohol, Arachidyl Glucoside, Behenyl Alcohol, Butyrospermum Parkii (Shea) Butter, C15-23 Alkane, Calcium Disodium EDTA, Citric Acid, Hydrated Silica, Lanolin Alcohol, Lauric Acid, Limonene, Linalool, Myristic Acid, Oleic Acid, Palmitic Acid, Phosphoric Acid, Sodium Hydroxide, Sodium Saccharin, Sorbitan Olivate, Thymol

What is Dermol 500 Lotion

Dermol 500 Lotion is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap-substitute

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol 500 Lotion, including babies.

There are two types of the active ingredient in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials. These help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol 500 Lotion

Use it only on the skin. For maximum benefit, you should use this product on a regular basis and as often as required.

Before using the 500 ml bottle, turn the top of the pump dispenser anti-clockwise to unlock it.

After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application

• Apply Dermol 500 Lotion to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol 500 Lotion, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol 500 Lotion to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

What does Dermol 500 Lotion contain?

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (2.5% w/w) and isopropyl myristate (2.5% w/w).

The other ingredients are cetostearyl alcohol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol and purified water.

What is Dermol 600 Bath Emollient

Dermol 600 Bath Emollient is an antimicrobial and emollient (softening and moisturising) skin treatment for you to add to your bath water when bathing.

It helps to treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol 600 Bath Emollient, including babies.

There are two types of the active ingredient in this product:

• Benzalkonium chloride is an antimicrobial. This helps to:
• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.
• Liquid paraffin and isopropyl myristate are emollients that help to:
• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol 600 Bath Emollient

For maximum benefit add this product to your bath water every time you have a bath.

For adults, older children and the elderly:

• Shake the bottle before use.
• Add up to 30 ml (1½ capfuls) to a normal-sized bath filled with warm water.
• Get into the bath and cover the affected areas of skin with the bathwater.
• Soak for 5 to 10 minutes.
• Pat the skin dry with a soft towel.
• Avoid rubbing with the towel because this makes dry skin conditions worse.

For babies and younger children:

• Shake the bottle before use.
• Add up to 15 ml (¾ of a capful) to a small bath of warm water or a wash basin.
• Submerge the affected areas of the skin.
• Soak for 5 to 10 minutes.
• Alternatively, repeatedly sponge the water over the affected skin areas.
• Pat the skin dry with a soft towel.
• Avoid rubbing with the towel because this makes dry skin conditions worse.

It is not necessary to use soap for additional cleansing. If desired, however, a fragrance-free soap substitute should be used. This type of product does not foam or lather.

If you forget to use Dermol 600 Bath Emollient

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you require it.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water.

If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol 600 Bath Emollient contain

The active ingredients in this product are benzalkonium chloride (0.5% w/w), liquid paraffin (25% w/w) and isopropyl myristate (25% w/w).

The other ingredients are sorbitan monostearate, polysorbate 60, industrial methylated spirits and purified water.

What is Dermol Wash

Dermol Wash is a moisturising, protective and antiseptic soap substitute for you to use whenever you wash. It has been developed for use instead of soaps (bars and liquids) and cleansers, both of which may irritate dry skin.

Dermol Wash can also be used as a leave-on treatment, re-applied after washing and drying.

It helps treat and prevent dry and itchy skin conditions. Common examples include:

• occupational hand dermatitis (due to frequent hand-washing, or repeated contact with water or chemicals such as cleaning or hair products)
• eczema and other types of dermatitis
• psoriasis (scaly, pink patches of skin)
• elderly pruritus (itchy skin due to ageing)
• ichthyosis (unusually scaly skin)

All age groups can use Dermol Wash, including babies.

The active ingredients in this product are isopropyl myristate and liquid paraffin (which are emollients), and benzalkonium chloride and chlorhexidine dihydrochloride (which are antimicrobials).

This soap substitute is specially designed to be non-foaming and is fragrance-free. When used as part of your normal washing routine, it helps to:

• cleanse, soften, moisturise and protect your skin by trapping in moisture and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and by the soaps, foaming additives and fragrances used in ordinary cleansing products
• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin
• prevent ‘flare-ups’ of your skin condition

This product can be used in addition to any other emollients or treatments your doctor, pharmacist or nurse may have given or prescribed for you to treat your dry skin condition.

How to use Dermol Wash

This product is only for application to the skin. Use this product as part of your normal washing routine, instead of your ordinary soap (bar or liquid) or cleanser. For maximum benefit, you should use it whenever you wash (including routine handwashing).

Before using this product, turn the top of the pump dispenser anti-clockwise to unlock it. After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

• Wash with this product in the same way as you would with any liquid soap.
• Use it with a gentle washing action. The product will not foam or lather as you wash.
• Rinse off (you should still be able to feel the product coating the skin).
• Pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse). You can also use Dermol Wash as a leave-on treatment, by re-applying it after washing and drying.
• Gently smooth the product into the dry skin areas. If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• If you are applying another product to the same areas of skin as Dermol Wash, try to avoid mixing the two products. You can do this by applying the treatments alternately, leaving enough time to allow the previous product to soak in.
• Dermol Wash can be used for intensive and frequent hand-washing (e.g. for healthcare professionals in a clinical setting).
• Using Dermol Wash, follow the hand-washing technique normally recommended.
• Rinse thoroughly and dry.
• Apply Dermol Wash to hands as a leave-on skin conditioner.

If you forget to use Dermol Wash

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you wash.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water.

If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol Wash contain

The active ingredients in this product are isopropyl myristate (2.5% w/w), liquid paraffin (2.5% w/w), benzalkonium chloride (0.1% w/w) and chlorhexidine dihydrochloride (0.1% w/w). The other ingredients are cetostearyl alcohol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol and purified water.

What is Dermol Cream

Dermol Cream is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap substitute.

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol Cream, including babies.

There are two types of active ingredients in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials that help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol Cream

Use it only on the skin. For maximum benefit, you should use it on a regular basis and as often as required.

Before using the cream, turn the top of the pump dispenser anti-clockwise to unlock it. After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application:

• Apply Dermol Cream to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol Cream, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol Cream to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

If you forget to use Dermol Cream

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you require it.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water. If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol Cream contain

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (10% w/w) and isopropyl myristate (10% w/w).

The other ingredients are cetostearyl alcohol, glycerol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol, disodium phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate and purified water.

What is Dermol Cream

Dermol Cream is an antimicrobial and emollient (softening and moisturising) treatment for application to dry or problem skin.

It is for use in two ways:

• as a leave-on application
• as a soap substitute.

It helps treat and prevent dry and itchy (pruritic) skin conditions, especially eczema and dermatitis.

All age groups can use Dermol Cream, including babies.

There are two types of active ingredients in this product:

Benzalkonium chloride and chlorhexidine dihydrochloride are antimicrobials that help to:

• combat bacteria present on your skin that can make eczema worse
• prevent infection caused by scratching itchy skin.

Liquid paraffin and isopropyl myristate are emollients that help to:

• soften, moisturise and protect your skin by trapping moisture in the skin and restoring the normal protective function of the skin
• prevent the skin-drying and irritant effects that can be caused by washing and bathing and by the soaps, foaming additives and fragrances used in ordinary skin cleansing products.

This product can be used in addition to any other emollients or treatments your doctor or pharmacist may have given or prescribed for you to treat your dry skin condition.

How to use Dermol Cream

Use it only on the skin. For maximum benefit, you should use it on a regular basis and as often as required.

Before using the cream, turn the top of the pump dispenser anti-clockwise to unlock it. After unlocking, you will need to press down the pump dispenser several times to prime the pump before any product is dispensed.

The same instructions apply for all age groups:

For use as a leave-on application:

• Apply Dermol Cream to the affected areas.
• Gently smooth into the skin.
• If necessary, allow time for any excess to soak in. Do not rub the skin vigorously.
• Reapply as often as required.
• If you are applying another treatment to the same areas of skin as Dermol Cream, try to avoid mixing the two products. This can be achieved by applying the treatments alternately, leaving sufficient time to allow the previous application to soak in.

For use as a soap substitute

• Use Dermol Cream to wash with instead of your ordinary soap or shower gel. It will not foam or lather like ordinary cosmetic products.
• After washing, bathing or showering, pat the skin dry with a soft towel (avoid rubbing as this can make dry skin conditions worse).

If you forget to use Dermol Cream

Do not worry if you occasionally forget to use it, just carry on using the product as described the next time you require it.

If the product gets into the eyes

The product may cause irritation if it gets into the eyes. Rinse the eyes with plenty of water. If rinsing one eye, take care to avoid washing the product into the other eye. If irritation persists, seek medical advice.

What does Dermol Cream contain

The active ingredients in this product are benzalkonium chloride (0.1% w/w), chlorhexidine dihydrochloride (0.1% w/w), liquid paraffin (10% w/w) and isopropyl myristate (10% w/w).

The other ingredients are cetostearyl alcohol, glycerol, macrogol cetostearyl ether (cetomacrogol 1000), phenoxyethanol, disodium phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate and purified water.